Ceiling Fan Switch
Thursday, October 29th, 2009The most common ceiling fan parts are switches, motors, mounting brackets, capacitors and pulls, just to name a few.
Apart from fan blades, the fan part that usually needs to be replaced is the ceiling fan switch. It is tends to break more often due to the pressure and pulling it usually gets. Over time the light switch may need replacing if it stops working.
Follow these easy-to-follow steps in replacing your ceiling fan switch:
Tools needed: screw driver, tape, hand pliers
1. Terminate the power. set about actual that you makeup the paramount competence execute before you discover replacing the glistening handle. De-activate the device that cuts off the circuit. For a better solution, remove the fuse powering the room.
2. Disassemble the bulbs. After you locate the pull chain, use some tape to indicate which one it is. When you take out the light fixture you will find it much less confusing to locate the fan control switch. manage extrinsic the shades and radiant bulbs by loosening the screws that hold office institute at the implant of each covering.
3. Take out the ballast cover. The ballast cover has light bulbs fixed to it. Take extra care when unscrewing and lowering it. the wrap should not be pull powerfully since it is connected to the ceiling fan
4. Remove the light fixture. Detach the fan from the light fixture by making use of the plastic wire harness connecting all the wires of the ceiling fan to the wires of the light fixture. Push the release lever and the wire harness will separate, then place it on the table. Next, locate the light switch inside the fixture and be sure to avoid the fan switch that you had marked with a tape.
5. Replace the old switch. Unscrew the cap on the ballast cover and take out the fan light switch that you wish to change. Be careful to match the existing wires with the new wires from the fan light switch.
Unscrew the wire nuts connecting every pair of wire from the old switch to detach them. Match one pair at a time, then connect the wires to the new light fixture switch. effect a clockwise direction, notion the nasty ends of the wires therefore fix the wire issue. To firmly place it, rotate it in clockwise direction. Do the same thing for all the identical pairs of colored wires.
6. Rearrange. All of your function is done. The threaded end may be put through the hole in ballast cover with light switch The cap that holds the light chain insert the pull chain in that cap. From the light fixture to the fan, reconnect the wires.
Replace the screws on the ballast cover, and put the bulbs back in place.
As a last step, turn the fuse back on to test the switch.
Should you need to find new replacement parts for your ceiling fan, you can find great fan switch choices online. As with all other electrical equipment and appliances, you should exercise care when installing new parts, and if you are really unsure of what you are doing have a professional do the work for you.
To find more information on this topic you can find it at Ceiling Fan Switch - which helps people find the best information for The Best Ceiling Fan Switch and ceiling fans parts